Schematics
Some of the schematics list a 5V filament supply. I do not recommend you use this setting as it is too low. The VT52 should be run at 6.3V and with exception 7V. The 5V will not give enough emission and choke the tube!!!!
| ECC83
- VT52 - 5U4G single-ended view schematic |
ECC83
- VT52 single-ended view schematic |
ECC83
- VT52 single-ended view schematic |
| 310A
- VT52 single-ended view schematic |
ECC83
- VT52 single-ended view schematic |
ECC83
- VT52 - 5U4G single-ended view schematic view power supply |
| 310A
- 336A - VT52 - 274A push-pull view schematic |
VT52
- 45 - 274A push-pull view schematic |
102D
- VT52 - PX4 - 274A integrated push-pull + riaa view schematic |
